LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Epica LT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Electrical System >> Repair Instructions >> Battery Tray Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Battery And Cables
    GM1255516Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Fig 2: View Of Battery And Terminals
    GM1255515Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the positive battery cable.
  4. Remove the nuts from the battery rods that fasten the battery hold-down bar clamp.
  5. Fig 3: View Of Battery Carrier Tray And Bolts
    GM1255517Courtesy of GENERAL MOTORS CORP.
  6. Inspect the battery carrier tray for obvious cracks or damage.
  7. Detach the carrier tray if necessary by removing the battery carrier tray upper bolts, including the bolt of the battery terminal.
  8. Remove the battery carrier tray lower bolts.