LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Epica LT >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Wheel Speed Sensor Replacement - Front >> Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Disconnect the front wheel speed sensor electrical connector.
    4. Fig 1: View Of Front Hub Unit, Steering Knuckle Assembly And Wheel Speed Sensor
    GM1255818Courtesy of GENERAL MOTORS CORP.
  4. Remove the front hub unit from the steering knuckle assembly, because the wheel speed sensor is not serviceable separately. Refer to Steering Knuckle Replacement .
scientia non olet · About LEMON Manuals