LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cutaway 6.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 944 (Disc Brake System) >> Repair Instructions >> Front Brake Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Disc Brake Components (15 Series)
    GM913491Courtesy of GENERAL MOTORS CORP.
  1. Install the splash shield (6), for 15 series.
    2. Fig 2: Splash Shield (25/35 Series)
    GM371077Courtesy of GENERAL MOTORS CORP.
  2. Install the splash shield, for 25/35 series.
  3. Install the hub and bearing assembly (5). Refer to Wheel Hub, Bearing, and Seal Replacement (4WD) or Wheel Hub, Bearing, and Seal Replacement (RWD) .
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  5. Remove the safety stands.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals