LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cutaway 6.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 927 (Mirror System) >> Repair Instructions >> Power Mirror Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector From Power Window/Door Lock/Mirror Switch
    GM333969Courtesy of GENERAL MOTORS CORP.
  1. Install the power mirror switch (9) to the front door trim plate (1).
  2. Press the power mirror switch (9) towards the front door in order to engage the retaining tabs to the front door trim plate (1).
  3. Install the electrical connector (2) to the power mirror switch (9).
  4. Install the front door trim plate (1). Refer to Front Door Trim Plate Replacement .