LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cutaway 6.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 909 (Lighting Systems) >> Repair Instructions >> Front Position Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Position Lamp
    GM362106Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb (4) to the socket.
  2. Push in on the bulb (4) and turn 1/4 turn clockwise.
  3. Install the bulb (4) and socket into the rubber grommet in the headlamp capsule (1).
  4. Install the headlamp capsule (1) to the headlamp housing.
  5. Install the retaining ring to the headlamp housing assembly.
    6. NOTE: Refer to FASTENER NOTICE .
  6. Install the screws to the retaining ring to the headlamp housing assembly.

    Tighten:  Tighten the screws to 1.5 N.m (13 lb in).

scientia non olet · About LEMON Manuals