Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Install the lamp assembly to the bumper.
- Install the nut to the lamp.
Tighten: Tighten the nut to 2 N.m (18 in lb).
- Connect the electrical connector to the lamp assembly.
NOTE:
Refer to Fastener Notice
.