LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Corvette Z06, 7.0 E >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 7.0L - Introduction (2 Of 2) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Disconnecting The Electrical Connector For The Mass Air Flow (MAF)/intake Air Temperature (IAT) Sensor
    GM1672559Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector for the mass air flow (MAF)/intake air temperature (IAT) sensor.
  2. Loosen the clamp.
    3. Fig 2: Removing The Air Cleaner Assembly
    GM1672572Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts holding the air cleaner assembly to the radiator core support.
  4. Remove the air cleaner assembly.
scientia non olet · About LEMON Manuals