LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Secondary And Configurable Customer Controls) >> Diagnostic Information and Procedures >> Steering Wheel Controls Inoperative >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to SIR Caution .
  1. Ignition OFF, disconnect the harness connector at the right steering wheel control switch.
  2. Test for infinite resistance between the signal terminal 4 and the ignition terminal 2 with the switch in the open position.
    • If not the specified value, replace the switch.
  3. Test the resistance values between the signal terminal and the ignition terminal with the switch closed in each position. Verify values are approximate to what the schematic reads.
    • If values do not match, replace the switch.
scientia non olet · About LEMON Manuals