LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Exhaust System) >> Repair Instructions >> Exhaust Tail Pipe Flow Valve Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery.
    2. Fig 1: Identifying Exhaust Tail Pipe Flow Valve Control Module Connector
    GM1688227Courtesy of GENERAL MOTORS CORP.
  2. Disconnect both electrical connectors.
  3. Detach the exhaust tail pipe flow valve control module by pulling off two-sided tape.
    4. Fig 2: Identifying Exhaust Tail Pipe Flow Valve Control Module
    GM1688226Courtesy of GENERAL MOTORS CORP.
  4. Remove the exhaust tail pipe flow valve control module.
scientia non olet · About LEMON Manuals