LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (HVAC System - Automatic) >> Repair Instructions >> Recirculation Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement .
    2. Fig 1: HVAC Module & Components
    GM1224363Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the HVAC module wiring harness from the recirculation housing wire harness retainer.
  3. Remove the recirculation actuator mounting screws.
  4. Remove the recirculation actuator.
  5. Disconnect the electrical connector from the recirculation actuator.
scientia non olet · About LEMON Manuals