LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Stationary Window System) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stationary rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
    2. Fig 1: Locating Rear Window Defogger Electrical Connector
    GM401856Courtesy of GENERAL MOTORS CORP.
  2. Connect the rear window electrical connectors.
  3. Install the lock pillar garnish moldings. Refer to Garnish Molding Replacement - Lock Pillar Upper in Interior Trim.
  4. Close the rear compartment lid.
  5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals