LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Aveo LS, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Antilock Brake System With Traction Control System) >> Diagnostic Information and Procedures >> DTC C0161 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the EBCM.
  2. Connect a test lamp between the signal circuit terminal 16 and ground.
  3. Ignition ON, apply and release the brake pedal. The test lamp should turn ON and OFF as the brake pedal is applied and released.
    • If the test lamp is always ON, test the signal circuit for a short to voltage.
    • If the test lamp is always OFF, test the signal circuit for a short to ground or an open/high resistance.
  4. If all circuits test normal, replace the EBCM.
scientia non olet · About LEMON Manuals