LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Aveo LS, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Antilock Brake System With Traction Control System) >> Diagnostic Information and Procedures >> DTC C0110 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the EBCM.
  2. Test for less than 1Ω between the ground circuit terminal 13 and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Test for less than 1Ω between the ground circuit terminal 26 and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  4. Ignition ON, verify that a test lamp illuminates between the B+ circuit terminal 1 and ground.
    • If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance. If the circuit tests normal and the B+ circuit fuse is open, replace the EBCM.
  5. Verify that a test lamp illuminates between the B+ circuit terminal 14 and ground.
    • If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance. If the circuit tests normal and the B+ circuit fuse is open, replace the EBCM.
  6. If all circuits test normal, replace the EBCM.
scientia non olet · About LEMON Manuals