Disabling Procedure
- Turn the steering wheel so that the vehicle wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition.
- Remove the SIR fuse from the fuse block.
- Raise and support the vehicle.
- Remove the connector position assurance (CPA) from both front end sensor connectors (2) located on the frame crossmember (1).
- Disconnect both front end sensor connectors (2).
IMPORTANT:
Refer to SIR Service Precautions before disabling the SIR system.
IMPORTANT:
With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate a SIR system malfunction.
IMPORTANT:
This vehicle is equipped with 2 inflatable restraint front end sensors. When performing this procedure be sure to include both front end sensors.