Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .
- Remove the instrument panel (I/P) compartment and the electrical connector from the I/P compartment lamp. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
- Remove the I/P module pigtail harness clips from the I/P carrier bracket.
- Remove the mounting fasteners (4) that attach the inflatable restraint module to the I/P.
- Remove the bolts (5) that attach the inflatable restraint I/P module to the cross-car beam.
- Remove the inflatable restraint I/P module (1) from the vehicle.
- Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .
CAUTION:
Refer to SIR Inflator Module Handling and Storage Caution
in Cautions and Notices.