Conditions for Running the DTC

The following conditions must be met:

• DTCs P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0128, P0131, P0132, P0133, P0134, P0135, P0201, P0202, P0203, P0204, P0205, P0206, P0420, P0443, P0446, P0449, P0452, P0453, P0455, P0496, P1133, P1134 are not set.
• The Engine Run Time parameter is at least 3 minutes.
• The MAF sensor parameter is between 5-38 g/s.
• The Engine Speed parameter is between 602-3,000 RPM.
• The TP sensor parameter is between 3-35 percent.
• The ECT sensor parameter is more than 65°C (149°F).
• The system voltage is between 9-18 volts.
• Traction control, if equipped, is not active.
• Decel Fuel Cutoff parameter is Not Active.
• Power Enrichment (PE) parameter is Not Active.
• The Catalytic Converter Protection Active parameter is NO.
• The predicted oxygen sensor temperature is more than 0°C (32°F).
• The above conditions have been met for at least 3 seconds.