Conditions for Running the DTC

The following conditions must be met:

• DTCs P0030, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0128, P0131, P0132, P0134, P0135, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0442, P0443, P0446, P0449, P0452, P0453, P0455, P0496 are not set.
• DTCs P2A01, P0401 (where applicable), and P0420 are not commanding fuel.
• The system voltage is between 9-18 volts.
• The scan tool special functions are not active.
• The ECT sensor parameter is more than 65°C (149°F).
• The Engine Run Time parameter is more than 60 seconds.
• The vehicle is not in PARK, REVERSE, or NEUTRAL.
• The Loop Status parameter is closed.
• The MAF sensor parameter is between 15-30 g/s.
• The TP Sensor Parameter is at least 2 percent.
• The Engine Speed parameter is between 1,200-2,200 RPM.
• The EVAP system is purging.
• The above conditions have been met for one second.