Conditions for Running the DTC

DTCs P0102, P0103, P0107, P0108, P0121, P0122, P0123, P0401, P0403, P0404, P0405, P0406, P0442, P0443, P0446, P0449, P0455, P0496, P1404 are not set.
The engine is running.
The Ignition 1 Signal parameter is between 9-18 volts.
The traction control is inactive, if equipped.
The TP Sensor parameter is less than 25 percent.
The change in the TP Sensor parameter is less than 1.5 percent.
The difference between the MAP Sensor parameter and the BARO parameter is less than 63 kPa.
The change in the MAP Sensor parameter is less than 3 kPa.
The EGR Position Sensor parameter is less than 100 percent.
The EGR Solenoid Command parameter is less than 100 percent.
The EVAP Purge Solenoid Command parameter is less than 100 percent.
DTC P0401 is not active.
The above conditions are met for more than 5 seconds.