LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Venture LS >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Seat Adjuster Switch
    GM455475Courtesy of GENERAL MOTORS CORP.
  1. Connect the adjuster switch electrical connector.
  2. Install the adjuster switch to the finish cover.
  3. Install the finish cover to the seat adjuster.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the finish cover screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  5. Connect the front seat pretensioner electrical connector.
  6. Connect the front seat SIR module electrical connector.
scientia non olet · About LEMON Manuals