LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Venture LS >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Wheel Control Switch Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Steering Wheel Control Switch Assembly
    GM754646Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the steering wheel control switch.
  2. Push the steering wheel controls switch into the steering wheel.
  3. Install the steering wheel controls wire harness to the retainers in the steering wheel.
  4. Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
scientia non olet · About LEMON Manuals