LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander LS >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Manual >> Repair Instructions >> Recirculation Actuator Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Recirculation Actuator
    GM1548539Courtesy of GENERAL MOTORS CORP.
  1. Install the recirculation actuator levers (3, 6), if necessary.
  2. Install the recirculation actuator (7).
  3. Install the recirculation actuator bolts/screws (1).

    Tighten:  Tighten the screws to 1.2 N.m (11 lb in).

    4. Fig 2: Identifying Recirculation Actuator Electrical Connector
    GM1548559Courtesy of GENERAL MOTORS CORP.
  4. Connect the recirculation actuator electrical connector (1).
  5. Install the upper I/P trim pad. Refer to Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel in Instrument Panel, Gages, and Console.
  6. Re-calibrate the actuators. Refer to Re-Calibrating Actuators .
scientia non olet · About LEMON Manuals