LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Rear Suspension System) >> Repair Instructions >> Rear Axle Lower Control Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the rear spring. Refer to Coil Spring Replacement .
    4. Fig 1: Removing Lower Control Arm To Support Assembly Bolt And Nut
    GM1361415Courtesy of GENERAL MOTORS CORP.
  4. Remove the lower control arm to support assembly bolt and nut.
  5. Remove the lower control arm from the vehicle.
  6. Remove the lower control arm spring insulators. Inspect the lower spring insulator for damage and replace as necessary.
scientia non olet · About LEMON Manuals