Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing & Installing Transaxle Mount-To-Transaxle Attachment Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the transaxle mount into the vehicle and tighten the bolts.
Tighten: Tighten the transaxle mount bolts to 90 N.m (66 lb ft).

Fig 2: View Of Front Transmission Mount Through Bolt

Courtesy of GENERAL MOTORS CORP.

Install the transaxle mount through bolt.
Tighten: Tighten the transaxle mount through bolt to 90 N.m (66 lb ft).
Lower the vehicle.