Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pressing Tabs On Control Cable And Removing & Installing Cable From Control Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the console. Refer to Console Replacement in Instrument Panel, Gages, and Console.
Press the tabs on the control cable and remove the cable from the control assembly.

Fig 2: Disconnecting Control Cable From Transaxle Range Switch Lever

Courtesy of GENERAL MOTORS CORP.

Disconnect the control cable from the transaxle range switch lever.

Fig 3: Removing & Installing Cable From Control Cable Bracket

Courtesy of GENERAL MOTORS CORP.

Press the 2 tabs on the control cable and remove the cable from the control cable bracket.

Fig 4: Removing & Installing Control Cable Grommet

Courtesy of GENERAL MOTORS CORP.

Remove the control cable grommet from the dash panel.
Remove the control cable from the vehicle.