Disabling Procedure
IMPORTANT:
Refer to SIR Service Precautions .
- Turn the steering wheel so that the vehicles wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition switch.
- Open the hood and locate the underhood fuse center.
- Lift the cover for the underhood fuse center.
- Locate and remove the air bag fuse from the underhood fuse center.
- Open front hood and locate both right and left front end sensors (1), also known as the electronic front sensor (EFS).
- Remove both connector position assurance (CPA) from the right and left front end sensor.
- Disconnect both front end sensors wiring harness connectors from the left and right front end sensor (1).
IMPORTANT:
With the Air Bag Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation, and does not indicate an SIR System malfunction.