LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Lighting Systems) >> Repair Instructions >> Backup Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying License Plate Lamp Sockets
    GM761258Courtesy of GENERAL MOTORS CORP.
  1. Install the backup lamp bulbs to the socket, if removed.
  2. Install the backup lamp bulb/socket to the applique by rotating clockwise.
  3. Install the lift gate applique. Refer to Liftgate Applique Replacement in Body Rear End.
scientia non olet · About LEMON Manuals