LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Ignition Switch Lock Cylinder Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ignition Lock Cylinder
    GM1207714Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: If you are installing a new lock cylinder, refer to Key and Lock Cylinder Coding in General Information.
  1. Install the ignition lock cylinder.
  2. Install the knee bolster. Refer to Knee Bolster Replacement .
scientia non olet · About LEMON Manuals