LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Console Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right console trim panel. Refer to Console Trim Panel Replacement - Right .
  2. Remove the left console trim panel. Refer to Console Trim Panel Replacement - Left .
    3. Fig 1: View Of Front Console Screws
    GM1207902Courtesy of GENERAL MOTORS CORP.
  3. Remove the front console screw covers from behind the console.
  4. Remove the front console screws.
    5. Fig 2: View Of Rear Console Bolts
    GM1207907Courtesy of GENERAL MOTORS CORP.
  5. Position the front seats to the full forward position.
  6. Remove the rear console bolts.
  7. Place the shifter in drive.
    8. Fig 3: View Of Pen Tray
    GM1207906Courtesy of GENERAL MOTORS CORP.
  8. Remove the pen tray.
    9. Fig 4: View Of Electrical Connectors And Console
    GM1207909Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not let the console contact the shifter handle or bezel.
  9. Disconnect the electrical connectors and remove the console.
scientia non olet · About LEMON Manuals