LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel System Displays, Gauges And Console) >> Diagnostic Information and Procedures >> Scan Tool Output Controls

Scan Tool Output Controls

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
IPC

Scan Tool Output Control Additional Menu Selections Description
Display Test Special Functions The instrument panel cluster (IPC) drives all of the gages at or below minimum for a few seconds when you select ON, then drives all of the gages at or above maximum for a few seconds. The IPC Display Test will end after one cycle of the gages sweep.
Segment Check Special Functions The IPC illuminates all of the indicators for 7 seconds when you select ON. The IPC turns off the indicators after the 7 seconds.
Dimming Special Functions The IPC increases or decreases the dimming intensity in increments of 20 percent between a range of 0-100 percent.
scientia non olet · About LEMON Manuals