LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Seat System) >> Repair Instructions >> Seat Back Panel Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to SIR Caution .
  1. Remove the lumbar knob, if equipped. Refer to Lumbar Support Knob Replacement .
    2. Fig 1: View Of Inflatable Restraint Side Impact Module Trim
    GM1506507Courtesy of GENERAL MOTORS CORP.
  2. Remove the inflatable restraint side impact module trim (1).
    3. Fig 2: View Of Seat Back Panel
    GM1506502Courtesy of GENERAL MOTORS CORP.
  3. Starting at the top of the seat back panel, remove the push-in retainers by pulling the panel from the seat back frame.
  4. Remove the seat back panel from the seat back frame by pulling straight up to release the lower hooks.
  5. Remove the seat back panel.
scientia non olet · About LEMON Manuals