LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Seat System) >> Repair Instructions >> Heated Seat Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Heated Seat Switch From Trim Panel
    GM1298343Courtesy of GENERAL MOTORS CORP.
  1. Install the heated seat switch to the trim panel.
  2. Connect the wire harness to the switch and route the harness through the V-retainer.
  3. Install the outer trim panel to the seat cushions. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat .
scientia non olet · About LEMON Manuals