LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Control System - 3.5L (Lx9) - Introduction) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing MAP Sensor And MAP Sensor Seal From Upper Intake Manifold
    GM1239001Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the MAP sensor electrical connector.
  2. Remove the MAP sensor attaching screw.
  3. Remove the MAP sensor and MAP sensor seal from the upper intake manifold.
scientia non olet · About LEMON Manuals