LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Hanger Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Exhaust Hanger
    GM1544740Courtesy of GENERAL MOTORS CORP.
  1. Install the exhaust system hanger (1).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the exhaust system hanger bolts (2).

    Tighten:  Tighten the bolts to 35 N.m (26 lb ft).

    3. Fig 2: Locating Exhaust Hangers
    GM1544741Courtesy of GENERAL MOTORS CORP.
  3. Install any exhaust insulators (1) to the exhaust system (2) and vehicle body if replacement of insulator was necessary.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals