LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Wheel Speed Sensor Replacement - Rear >> Installation Procedure

Installation Procedure

  1. Install the hub and bearing assembly to the vehicle. Refer to Wheel Bearing/Hub Replacement - Rear (Without Independent Suspension) or Wheel Bearing/Hub Replacement - Rear (Independent Suspension) in Rear Suspension.
  2. Turn the ignition switch to the ON position, with the engine OFF.
  3. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.
scientia non olet · About LEMON Manuals