LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Controls - 8.1L (Introduction)) >> Repair Instructions >> Spark Plug Wire Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Spark Plug Wires (Left)
    GM843846Courtesy of GENERAL MOTORS CORP.
  1. Install the spark plug wire at the ignition coil.
  2. Install the spark plug wire to the spark plug.
  3. Inspect the wire for proper installation:
    1. Push sideways on the boot in order to inspect the seating.
    2. Reinstall any loose boot.
scientia non olet · About LEMON Manuals