LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls - 4.3L (Introduction)) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of MAP Sensor
    GM10933Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW MAP sensor seal, if necessary.
  2. Install the MAP sensor.
  3. Fig 2: EVAP Canister Purge Solenoid Valve & MAP Sensor
    GM782178Courtesy of GENERAL MOTORS CORP.
  4. Connect the MAP sensor electrical connector (2).