LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Repair Instructions >> Rear Axle Lower Control Arm Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Rear Axle Lower Control Arm-To-Frame Mounting Nut & Bolt
    GM731582Courtesy of GENERAL MOTORS CORP.
  1. Install the lower control arm.
  2. Install the rear axle lower control arm to the frame. Hand tighten only.
    3. Fig 2: Removing/Installing Rear Axle Lower Control Arm-To-Axle Mounting Nut & Bolt
    GM731580Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the rear axle lower control arm to the axle.

    Tighten:  Tighten both bolts to 100 N.m (74 lb ft).

  4. Remove the rear axle support.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals