LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Disc Brake System) >> Repair Instructions >> Disc Brake Hardware Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Caliper-To-Bracket Guide Pins
    GM891949Courtesy of GENERAL MOTORS CORP.
  1. Remove the disc brake caliper bolts.
  2. Remove the disc brake caliper from the mounting bracket. Refer to Brake Caliper Replacement - Front .
  3. Remove the disc brake pads from the disc brake caliper bracket.
  4. Remove the disc brake pad retainers from the disc brake caliper bracket.
  5. Remove the caliper pins (5) from the disc brake caliper mounting bracket (3).
  6. Remove the caliper pin boots (4) from the disc brake caliper mounting bracket.
  7. Lightly wire brush all brake pad contact areas in order to remove any corrosion.
scientia non olet · About LEMON Manuals