LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Rear Suspension System) >> Repair Instructions >> Rear Axle Upper Control Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear support assembly. Refer to Support Replacement - Rear in Frame and Underbody.
    2. Fig 1: Removing/Installing Rear Suspension Upper Control Arm-To-Support Assembly Bolt
    GM891523Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear suspension upper control arm to support assembly bolt and nut. Discard the nut and bolt.
  3. Remove the rear suspension upper control arm from the support assembly.
scientia non olet · About LEMON Manuals