LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Rear Suspension System) >> Repair Instructions >> Rear Axle Lower Control Arm Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear suspension lower control arm to the support assembly.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install a new nut and bolt to the rear suspension lower control arm to support assembly.

    Tighten:  Tighten the nut and bolt to 90 N.m (66 lb ft) plus and additional 60 to 75 degrees.

  3. Install the rear support assembly. Refer to Support Replacement - Rear in Frame and Underbody.

scientia non olet · About LEMON Manuals