LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Door System, Mirror System & Window System) >> Repair Instructions >> Weatherstrip Replacement - Drip Rail >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Drip Rail Weatherstrip
    GM893732Courtesy of GENERAL MOTORS CORP.
  1. Position the weatherstrip to the pinch-weld flange starting at the rear retainer holes.
  2. Install the weatherstrip push-in retainers pressing into place until fully seated.
  3. Install the weatherstrip push-in retainers pressing into place until fully seated.
  4. Close the doors and inspect the weatherstrip for proper fit.
scientia non olet · About LEMON Manuals