LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Splash Shield (15 Series)
    GM371033Courtesy of GENERAL MOTORS CORP.
  1. Install the splash shield.
  2. Install the splash shield retaining bolts, same as wheel hub and bearing.
  3. Install the front hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement in Suspension.
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
scientia non olet · About LEMON Manuals