LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Controls (Introduction)) >> Repair Instructions >> Ignition Coil(s) Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Negative Battery Cable
    GM74059Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
    2. Fig 2: Fuel Rail Cover
    GM74075Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel rail cover.
    3. Fig 3: Installing/Removing Ignition Coils & Bracket Assembly With Bolts
    GM309721Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the ignition coil harness connector.
  4. Disconnect the spark plug wire at the ignition coil.
  5. Remove the ignition coil mounting bolts.
  6. Remove the ignition coil.
scientia non olet · About LEMON Manuals