LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Controls (Introduction)) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Duct
    GM1465271Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector for the mass air flow/intake air temperature sensor (MAF/IAT) (1).
  2. Remove the connection for the IAT sensor (2).
  3. Loosen the clamps (3).
  4. Remove the air intake duct (4).
  5. Remove the MAF/IAT sensor (5).
  6. Remove the air cleaner assembly (6).
scientia non olet · About LEMON Manuals