LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Sunroof System) >> Repair Instructions >> Sunroof Motor Synchronization

Sunroof Motor Synchronization

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sunroof Motor/Actuator
    GM861218Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Verify that both the sunroof motor and the sunroof guide mechanisms are in the vent position before you begin the synchronization procedure.
  1. Plug the motor/actuator into the harness and provide power until the motor/actuator stops in the vent position. If the motor does not operate when powered, then the motor is already in the vent position.
  2. If the sunroof window is in the closed position, remove the sunroof window. Refer to Sunroof Window Replacement .
  3. Verify that the sunroof guide mechanisms are fully forward and in the vent position.
  4. Install the sunroof motor/actuator. Refer to Sunroof Motor/Actuator Replacement .
  5. Install the sunroof window, if necessary. Refer to Sunroof Window Replacement .
  6. Cycle the sunroof to verify proper operation.