LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Cruise Control System) >> Repair Instructions >> Cruise Release Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition OFF.
  2. Remove the left side lower instrument panel (I/P) closeout panel (hush panel) push pin fasteners and remove the panel.
    Fig 1: Removing Left Side Lower Instrument Panel Closeout Panel
    GM888497Courtesy of GENERAL MOTORS CORP.
  3. Remove the left side lower heater duct assembly push pin fastener and remove the duct.
  4. Disconnect the cruise brake switch harness connector.
    Fig 2: Removing & Installing Cruise Brake Switch
    GM893285Courtesy of GENERAL MOTORS CORP.
  5. Remove the cruise brake switch by rotating it to 180 degrees so it will pull out from the bracket.
scientia non olet · About LEMON Manuals