Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector.
- Install the high mounted stop lamp to the vehicle.
- Install the high mounted stop lamp screws.
Tighten: Tighten the high mounted stop lamp screws to 2 N.m (17 lb in).
- Inspect the operation.
NOTE:
Refer to Fastener Notice in Cautions and Notices.