LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra5 Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Automatic >> Repair Instructions >> Sun Load Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Sun Load Sensor And Electrical Connector
    GM1308481Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Gently pry up on the sun sensor to remove it.
  3. Secure the electrical connector to prevent it from falling beneath the dash.
  4. Disconnect the electrical connector and remove the sun sensor.
scientia non olet · About LEMON Manuals