LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra5 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 1.8L (L79) - Introduction And Mechanical Repairs >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of IAT Sensor And Connector
    GM1289424Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor into the air intake tube.
  2. Connect the IAT connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals