LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra5 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 1.6L (L91) - Introduction And Mechanical Repairs >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Engine Coolant Temperature Sensor
    GM1289410Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the ECT sensor.

    Tighten:  Tighten the ECT sensor to 17.5 N.m (13 lb ft)  .

  2. Connect the ECT sensor connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals